Knowledge
Practical articles, technical comparisons and anonymised production cases for machine vision and robot vision projects.
Blog
Rule-based vision or AI inspection | Sedeco
Choose rule-based vision or AI inspection based on product variation, definable rules, representative samples and agreed borderline cases.

Jeroen van den Berg
Blog
Inspection lighting: backlight, ring, dome or strobe? | Sedeco
Compare backlight, ring, dome and strobe lighting by visible contrast, motion, reflections and available installation space.

Jeroen van den Berg
Blog
Specifying vision as a machine builder | Sedeco
Specify vision as a repeatable machine module with defined interfaces, software versions, diagnostics, spare parts and maintenance responsibilities.

Jeroen van den Berg
Blog
Pick and place with 2D or 3D vision | Sedeco Imaging
Choose 2D or 3D for pick and place based on the working plane, part orientation, gripper, calibration, cycle time and exception handling.

Jeroen van den Berg
Blog
Use case: DPM / tough codes on metal | Sedeco
Practical example for DPM codes on metal: assess mark quality, reflections, limited visibility, lighting, reader selection and PLC handling.

Jeroen van den Berg
Blog
Managing vision components across integrator projects | Sedeco
Manage vision components across integrator projects with a preferred product set, an exception path and defined engineering and inventory rules.

Jeroen van den Berg
Blog
SC1000 / SC2000: start here | Sedeco
Prepare your SC1000/SC2000 quick start: check hardware and SCMVS compatibility, collect samples, agree PLC signals and define first-session acceptance.

Jeroen van den Berg
Blog
Smart camera or PC-based vision? Decision framework | Sedeco
Compare smart cameras and PC-based vision by camera count, cycle time, recipes, diagnostics, software ownership, maintenance and machine replication.

Jeroen van den Berg
Blog
Full service, integration or VAR: which model fits? | Sedeco
Compare full service, vision integration and components with advice across engineering, commissioning, software ownership, maintenance and responsibility.

Jeroen van den Berg
Blog
Feasibility: 10 questions before a PoC | Sedeco
Prepare a machine vision PoC with ten questions about samples, speed, environment, interfaces, exception handling and acceptance criteria.

Jeroen van den Berg