Hikrobot MV-CL line scan cameras

Line scan cameras for continuous inspection

An MV-CL line scan camera captures one narrow image line at a time while the material moves. Successive lines form a continuous image of film, paper, foil, coils, glass or long profiles.

Line format

4K, 8K and 16K classes

Image output

Mono or color

Interfaces

GigE to CoaXPress

Hikrobot MV-CL line-scan camera
Material moves
Encoder triggers
Image grows

Resolution across the material and sampling in the direction of movement are determined separately.

Image geometry and production speed

What determines line format and line rate

Material width and the smallest relevant feature determine the pixels required across the web. Transport speed and the required sampling in the direction of movement determine the line rate.

Sizing relationships

Across the web: field width ÷ pixels per line = object-space sampling.

Along the web: transport speed ÷ line rate = distance per line.

When the complete relevant surface fits within one field of view, anarea-scan camerais usually the simpler option.

01 · Geometry

Width and smallest feature

The material width and required object-space sampling determine the corresponding line format.

02 · Motion

Speed and encoder

An encoder can trigger lines by measured displacement when speed varies. Its measurement must represent actual material movement; an encoder on a slipping drive does not remove slip error.

03 · Exposure

Line light and contrast

The exposure must fit within the line period, while the line light must provide enough contrast at production speed.

04 · Data path

Interface and processing

Line format, line rate and bit depth determine the data stream that the interface and vision PC must process.

Hikrobot MV-CL line scan camera family

Compare exact MV-CL variants

The Hikrobot MV-CL line scan family

MV-CL includes documented 4K, 8K and 16K configurations for monochrome or colour acquisition, with interfaces from GigE to CoaXPress. The suitable combination follows from the required line format, line rate and data path.

Example: the MV-CL042-91GM datasheet lists 4096 × 2 monochrome pixels and Gigabit Ethernet. Standard-mode maximum line rate is 28 kHz at Mono 8 and 14 kHz at Mono 10/12. Its 80 kHz high-bandwidth figure is explicitly image-dependent. Validate that mode on representative material rather than using it as unconditional sizing capacity. Check the current model revision and host compatibility before selection.

GigE2.5GigECamera LinkFibreCoaXPress
Compare all MV-CL models

Line format

The required pixels across the field width follow from the smallest relevant feature.

Mono or color

Monochrome models suit intensity-based inspection and higher sensitivity. Colour models are relevant when colour differences contain inspection information.

Interface

Throughput, cable architecture and host hardware determine the suitable interface. Optics and lighting remain separate choices within the imaging setup.

Where line scan fits

Continuous material and long surfaces

Line scan suits products whose inspection length does not form a practical frame boundary. The camera captures one line while controlled movement supplies the second image dimension.

Film, foil and paper

Continuous webs can be inspected for surface, edge and print-related defects.

Print and labels

A continuous image supports registration, print-quality and missing-content checks.

Coils and long profiles

Line scan maintains consistent sampling for products that extend beyond one conventional field of view.

Glass and flat material

Stable transport and line lighting provide uniform coverage of glass and other flat materials.

A complete line-scan system

Motion

Encoder quality, transport stability and slip affect image geometry.

Optics

The lens must cover the long sensor with sufficient resolution and focus.

Lighting

Focused line lighting must provide contrast within the available exposure time.

Processing

Interface, host memory and algorithms must keep pace with the data stream.

Technical background

Compare the imaging methods

The technical guides explain how line images are formed and how line scan compares with area scan when both methods are possible.

Frequently asked

Selecting a line-scan camera in practice

Short answers about image formation, line rate, color and interface selection.

Questions about line scan sizing?

Discuss your line scan application with a specialist

Bring width, minimum feature size, speed range and representative material. Test geometry against a reference, contrast across the full line and missing-line detection at peak load. Include starts, stops and changes in surface appearance. Budget camera, suitable lens, line light, encoder, acquisition hardware and integration/validation hours × rate as one system.

Useful application information

Material width

The field the sensor must cover.

Smallest relevant feature

The defect or edge that must remain measurable.

Transport speed

Minimum, nominal and maximum speed.

Surface and contrast

Samples for optics and lighting tests.

Installation space

Working distance, cable path and line-light position.