Sedeco Imaging team at a trade show booth
Since 1994 · Still scanning

SEDECO

Sedeco Imaging: industrial vision since 1994

Sedeco Imaging was founded by Rob Paffen in 1994. Our work has included embedded cameras, image-processing software and robot-guided handling. Today we help machine builders, manufacturers and integrators select and implement industrial vision, from component advice to an agreed integration task.

1994 → now Embedded roots Independent again

Today

Vision that becomes part of the machine.

A production problem defines the project: a defect that escapes inspection, manual checking that limits capacity, or a robot that needs the part position. We assess the required image, processing and machine interface together. Camera, optics, lighting and software are selected against that task and the available installation conditions.

Full service

Define the requirement, test feasibility and agree engineering, installation and acceptance for the delivered system.

Integration

Add vision to an existing machine with a defined control interface, test scope and handover responsibility.

Components and advice

Supply cameras, optics, lighting and software with selection or configuration support; your team or integrator carries out the agreed implementation work.

Sedeco Imaging booth with Vision Master

History

Company history

The timeline records Sedeco’s development from embedded cameras and application software to component distribution and vision integration. These are company milestones; acceptance of a new application still depends on its own products, conditions and test results.

1 April 1994

Founding

Sedeco Imaging founded by Rob Paffen.

1994

Embedded camera

Development of Sedeco’s 8-bit embedded camera.

1995

Vision Components

Distribution of Vision Components DSP cameras.

1996

Pick & place software

Custom plant-cuttings pick & place software released.

2004

DataGate

Image visualisation software for embedded vision systems.

2007

Imputer

Distribution of Imputer (University of Edinburgh).

2009

MVNova

Computer Vision scripting software based on Lua.

2011

Vision Components GmbH

Acquisition by Vision Components GmbH.

2017

Bergfort partnership

Start of the collaboration with Bergfort.

2017

Hikrobot / Hikvision DACH & Benelux

Start of Hikrobot distribution for DACH and Benelux.

2024

Independent again

Sedeco continues independently. Sedeco Imaging GmbH founded for Germany, Switzerland and Austria.

30+

Years in Computer Vision

Founded in 1994, with experience in embedded imaging, application software and integration.

2

Hubs · Benelux & DACH

Woerden and Gotha serve customers in the Benelux and German-speaking markets.

2017

Start of Hikrobot distribution

Hikrobot is a technology partner for cameras, smart cameras and vision software.

Vincent van Montfoort

Ahead

Start with a testable requirement

Send representative products, the required decision, cycle time and machine interfaces. We can then define the technical scope and a trial with agreed limits for missed defects, false rejects and result time. Discuss who maintains settings and restores the system after replacement. For the investment estimate, bring current inspection hours, rejects and intervention records; compare these with hardware, engineering hours × rate and recurring maintenance.