Application · Smart camera

Smart-camera applications for standardised jobs.

An assembly check or code-reading station needs to return a result within the machine cycle and remain manageable for operators. A smart camera performs image processing in the camera and passes the result to machine control. Sedeco tests the inspection, optics and communication together before selecting a configuration.

Industrial smart camera hardware

1 · Problem

Keep inspection and operation manageable at the machine

A local inspection must produce the right result at the right point in the machine sequence. Define the required decision, visible feature and permitted product variation before selecting a smart camera. Operators also need a clear recipe-change and fault-recovery procedure.

Who it is for

A candidate application has defined good, defective and borderline products and a machine action for each result. Assign the owner of inspection limits and the person responsible for production acceptance.

Conditions

Examples include cap presence, assembly orientation or reading a specified code. Verify that the view contains every required feature. Checking print presence does not establish that its text is correct.

Limits

Compare PC-based vision when cameras must share results or local processing and storage are insufficient. Verify timing requirements for either architecture; a PC alone does not guarantee deterministic response.

2–4 · Approach & technology

Match the camera tools to the inspection

Select the camera, lens and lighting using actual products, the required field of view and cycle time. Check the tools and interfaces supported by the exact model and software version. Evaluate on-camera AI only where the model supports it and representative test images demonstrate its value for the task.

Technology

Specify the exact camera, lens, light, controller and software release. Record the validated field of view, exposure and product positions. Integrated lighting and optics must be tested against the same requirements as external components.

Integration

Use supported digital signals for status and an appropriate data connection for measurements or text. Agree ready, trigger, new-result and acknowledgement behaviour with the PLC engineer. Test missing, late and retained results so an old pass cannot approve a new product.

Suitable for

Build only the required tool sequence and measure its complete trigger-to-result time. Include any locating step, communication and image logging required during production. Validate the tools on samples not used for setup.

Integration · Feasibility · Delivery

Feasibility and how Sedeco delivers

The trial should answer whether the selected configuration meets the inspection and timing limits under the expected variation. If it does not, identify whether the limitation is image formation, processing or the machine interface. Test a revised configuration or compare external processing against the same evidence.

Feasibility

Test known good products, defects and borderline samples at production speed. Record missed defects or incorrect reads separately from false rejects or failed reads. Check late results, missing images, recipe changes and restart after a fault.

Delivery

Agree the delivered parts, configuration files, training and acceptance evidence. Define who implements PLC changes and reject handling, and who owns the backup and future recipe changes.

Next step

Bring the sample set, product variation, cycle time and required result deadline. Include a machine-interface description and the permitted mounting space so the trial can cover integration as well as image quality.

Vincent van Montfoort

Does a smart camera fit your job?

Estimate camera, lighting, mounting and licences plus configuration, PLC integration, validation and training hours × rate. Include backup restoration and future recipe maintenance. Compare with measured intervention time, false rejects and changeover work. A lower component count does not by itself establish a lower total cost.