A first lens selection

Machine vision lens configurator

Define the camera, sensor, field of view and working distance to calculate a practical lens shortlist for your imaging setup.

The result is a starting point for engineering. Verify focus range, image quality, mounting and lighting in the actual setup before ordering.

Prepare the inputs

Measure these values before using the configurator

Use dimensions from the intended machine layout. Keep all dimensional inputs in millimetres and include the full product-position and product-height variation.

Camera and sensor

Select the intended camera when it is known. Otherwise use the sensor format and resolution from the camera shortlist.

Field of view

Enter the complete width and height that must be visible, including positioning tolerance and a useful margin.

Working distance

Measure from the front of the lens to the product. Check the minimum and maximum distance when product height varies.

Application and detail

Choose the inspection type and enter the smallest defect, character, code module or edge that must remain visible.

Configure the optical setup

Start with the known camera and geometry. Open the advanced fields when the smallest detail or required resolution also needs to be assessed.

Configuration

Camera / Sensor
Camera source

Optional; used to check whether the smallest detail is visible.

Field of view

3D optical overview

Working distance: 500 mm
Black dot: smallest defect (true size): 0.2 mm
Orange ring: locator only (not to scale)
Scroll to zoom · drag to rotate · right-drag to pan
Working distance
500 mm
Field of view
300 × 200 mm
Calculated focal length
~12.432 mm
Sensor
7.2 × 5.4 mm

Configuration

Sensor
7.2 × 5.4 mm
Field of view
300 × 200 mm
Working distance
500 mm
Calculated focal length
~12.432 mm
Required resolution
0.1 mm/px
The sensor and field-of-view proportions differ. One axis may not be fully covered by a standard lens.

Compatible lens shortlist

No compatible lenses found.

Use the result

Turn the shortlist into a tested lens choice

The configurator narrows the catalogue using the optical geometry. The final choice also depends on focus range, aperture, distortion, edge sharpness, sensor coverage and mechanical fit.

  1. 1. Compare candidates. Check lens mount, supported sensor size, focal length and focus range for every result.
  2. 2. Build the intended geometry. Use the actual camera position, product-height range and available mechanical clearance.
  3. 3. Create stable contrast. Test the lens together with the intended lighting, exposure time and aperture.
  4. 4. Test boundary samples. Evaluate the smallest relevant detail at the centre and edges of the field across the agreed production variation.