720 × 540 · Mono · GigE · M12 · Standard board
MV-CB004-10GM-S
Area Scan Camera
Niet op voorraad
Selection guide
The selector contains only the 49 supplied combinations. Choose resolution and monochrome or colour from the inspection task. Choose the data interface from the host, cable and power design. Lens mount and hardware configuration determine how the optics and electronics fit into the available space.
Include the lens, connector access, cable bend radius, strain relief, heat transfer and service clearance. Compare the exact model drawing with the enclosure and mounting parts before releasing the mechanical design.
Calculate millimetres per pixel from the field width and horizontal resolution. Confirm that the smallest defect or feature remains measurable under representative lighting. Use colour only when colour contributes to the decision.
Check host bandwidth, cable length, connector retention, power delivery and the required frame rate. Validate the final cable and host controller; an interface name alone does not define sustained acquisition performance.
M12 and C-mount versions support different optics. Bare-board versions require a separate optical or mechanical assembly. FPC configurations change board connection and routing. Confirm flange position and mounting tolerances for the selected SKU.
Frame rate, shutter type, sensor, pixel size, power and dimensions remain SKU specifications. Six legacy 12 MP USB records do not document exact pixel dimensions in the current source data.
Acceptance should use the selected SKU, final lens, cable, host and mounting arrangement.
Compare complete camera assemblies using measured process requirements.
| Brand | Hikrobot |
|---|---|
| Category | Area-scan camera |
| Certification | CE, FCC, RoHS, KC |
| Color | Mono |
| Data interface | Gigabit Ethernet, compatible with Fast Ethernet |
| Digital I/O | 6-pin connector provides power and I/O, including non-isolated input × 1 (Line 0), non-isolated output × 1 (Line 1), and bi-directional non-isolated I/O × 1 (Line 2). |
| Power consumption | Typ. 2.5 W@12 VDC |
| Power supply | 9 VDC to 24 VDC, supports PoE |
| Certification | CE, FCC, RoHS, KC |
| Client software | MVS or third-party software meeting with GigE Vision Protocol |
| Compatibility | GigE Vision V2.0, GenICam |
| Operating system | 32/64-bit Windows XP/7/10, 32/64-bit Linux and 64-bit MacOS |
| Material code | 306301609 |
| Max. frame rate | 125.2 fps |
| Dimension | 29 mm × 29 mm × 30.2 mm (1.1" × 1.1" × 1.2") |
| Humidity | 20% to 80% RH, non-condensing |
| Lens mount | M12-mount |
| Temperature | Working temperature: 0 °C to 50 °C (32 °F to 122 °F) Storage temperature: -30 °C to 70 °C (-22 °F to 158 °F) |
| Weight | Approx. 45 g (0.1 lb.) |
| Model | MV-CB004-10GM-S |
| Product Model | MV-CB004-10GM-S |
| Type | 0.4MP Board Level Camera, GigE,IMX297,Mono,M12-mout |
| Data interface | GigE |
| Hardware configuration | Standard board |
| Lens mount | M12 |
| Mono/color | Mono |
| Resolution | 720 × 540 |
| Binning | Supports 1 × 1, 1 × 2, 1 × 4, 2 × 1, 2 × 2, 2 × 4, 4 × 1, 4 × 2, 4 × 4 |
| Decimation | Supports 1 × 1, 1 × 2, 1 × 4, 2 × 1, 2 × 2, 2 × 4, 4 × 1, 4 × 2, 4 × 4 |
| Dynamic range | 74 dB |
| Exposure mode | Off/ Once/ Continuous exposure mode |
| Exposure time | UltraShort exposure mode: 1 μs to 14 μs Standard exposure mode: 15 μs to 10 sec |
| Gain | 0 dB to 24 dB |
| Max. frame rate | 125.2 fps @720 × 540 |
| Mono/color | Mono |
| Pixel format | Mono 8/10/10p/12/12p |
| Pixel size | 6.9 μm × 6.9 μm |
| Resolution | 720 × 540 |
| Sensor model | Sony® IMX297 |
| Sensor size | 1/2.9" |
| Sensor type | CMOS, global shutter |
| SNR | 41 dB |
| Sensor model | IMX297 |
| Series | MV-CB board-level cameras |
Selection questions
These answers cover the 49 listed MV-CB variants. Check the specifications and mechanical drawing of the exact model before completing the camera and optics design.
Available resolutions run from 720 × 540 to 4032 × 3036 pixels. Base the choice on the full field of view and the smallest feature that must remain visible. As a first calculation, divide the field width by the number of horizontal pixels to obtain millimetres per pixel. Apply a practical safety margin and verify the result with representative good and rejected samples.
Choose colour when colour itself is part of the inspection decision. Monochrome is usually the more direct choice for geometry, edges, position, text and brightness contrast. Both versions exist in the family, but not for every combination of resolution, interface and lens mount.
The GigE models list GigE Vision V2.0 and GenICam compatibility; their specifications include 9 to 24 VDC and PoE support. The USB models list USB3 Vision and GenICam and are powered through USB on the specified variants. Select the interface together with the host connection, cable arrangement, power design and required frame rate.
M12 is intended for compact M12 optics. C-mount accepts interchangeable C-mount lenses and provides more freedom when matching focal length, field of view and working distance. A model without a lens mount is a bare-board configuration for integration with a separate optical or mechanical assembly. Check flange position, available space and the model drawing before selecting the lens.
The range contains standard-board and FPC versions, including specific 11-series and 60-F-series FPC configurations. FPC means that a flexible printed circuit is part of the camera connection or construction. This choice affects mechanical integration and cable routing; it does not replace the separate decisions for lens mount and data interface.
No. The family consists of 49 fixed model combinations. Depending on the exact model, the listed maximum frame rate ranges from 9.7 to 249.1 fps, and both global-shutter and rolling-shutter sensors occur. Some maxima also depend on pixel format, ADC setting or image-compression mode. Select an existing SKU first, then verify its full-resolution frame rate, shutter type, dimensions and power requirements.
Jeroen can help you choose the right model for your application.
